Ecosoft CROSS 90 User Manual

15
EN
INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2023
Period of life
Time of life re-
maining (days)
Liters of
capacity
remaining
Lifeme
display
Acousc
Normal > 15 > 150
Permanent
blue
No alarm
There is lile
le
≤ 15 ≤ 150
Permanent
violet
One beep when there is lile
me of life of the lters
Exhausted ≤ 0 ≤ 0
Permanent
red
Double beeps when lter
capacity or lifeme is ex-
hausted
To replace the cartridge you need to make easy steps:
1. Turn the exhaust lter counterclockwise.
2. Pull the exhausted lter towards you.
3. Present a new lter in its respecve housing with the handle in a horizontal posion.
4. Insert rmly all the way and turn the handle 90 degrees clockwise.
5. Reset the lter cartridge: long press the corresponding lter cartridge reset key for 5 seconds,
the buzzer will sound once (1s), the corresponding lter cartridge life indicator will ash purple
twice and then turn on blue. The system will start ushing the respecve lter for 5-6 minutes
(for CF and RO), indicator (1) ashes red. Aer this me expires, you must complete the rinsing of
the lters (RO and CB) by opening the puried water valve (3), and indicator 1 and the indicator
on the puried water valve will ash in the color corresponding to the current water quality. The
rinsing me for the RO lter is 30 minutes, and for the CB lter – 15 minutes. When the rinsing is
complete, indicator (1) and indicator (5) on the puried water valve light up blue.
5.3 FILTER LIFETIME DISPLAY
5. USAGE

Ecosoft CROSS 90 Specifications

General

Brand	Ecosoft
Model	CROSS 90
Category	Water Filtration Systems
Language	English