Ecosoft CROSS 90 - Smart Features

17
EN
INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2023
5.6 SMART FEATURES
5. USAGE
SMART features Display Acousc Soluon
Leak inside the
machine.
System indicator (1), lters
lifeme indicators (2-4) and
faucet indicator (5) ashing
red
Beeps for 3
minutes
When the leak is
eliminated, the alarm is
deacvated, and it returns
to the normal state
Protecon by
pump me
Filters lifeme indicators
(2-4) and faucet indicator
(5) ashing red
3 beeps
The pump has been
working between 30 and
33 minutes. Disconnect
and reconnect the
electrical connecon
Protecon
against lack
of inlet water
pressure
Pressure loss while the
system is running: the
system runs for 90 seconds,
then the pump stops,
service life indicators (2-4)
ash blue, open puried
water valve (5) ashes red
3 beeps
Open the inlet water
valve. Check the incoming
water supply line for
blockages
No inlet pressure at system
start-up: service life
indicators (2-4) ash blue,
open puried water tap (5)
ashes red
3 beeps
Open the inlet water
valve. Check the incoming
water supply line for
blockages
Protecon by
start / stop
Filters lifeme indicators
(2-4) and faucet indicator
(5) ashing violet
4 beeps
Disconnect and reconnect
the electrical connecon
Low temperature
protecon
System indicator (1), lters
lifeme indicators (2-4) and
faucet indicator (5) ashing
red
5 beeps
Disconnect and reconnect
the electrical connecon