Ecosoft CROSS 90 User Manual

16
INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2023
5.4 WATER QUALITY DISPLAY
5.5 SYSTEM OPERATION MODES
5. USAGE
Water quality Tds range, ppm Water quality display
Excellent < 100 Permanent blue
Good ≥ 100 and < 150 Permanent violet
Bad ≥ 150 Permanent red
Funcon Acon logic
Replacement lter
lifeme indicator
status
System indicator status
Power on
Buzzer beeps 0.1S, indicator
display 3S
Blue-Purple-Red
indicator light on 1S
Blue-Purple-Red indicator
light on 1S
First me use
washing
Automac ushing 5 mins
Blue always lights
on
Red ashing
The user turns on the tap to
go on running water for 30
minutes
Blue always lights
on
Flashing according to
current water quality
status
Washing for a
replacement
lter
1. CF lter cartridge:
automac ushing for 5
minutes.
2. RO lter cartridge:
automac ushing for 5
minutes, open the tap and
ush for 30 minutes.
3. CB lter cartridge: open
the tap and ush for 15
minutes.
Blue always lights
on
1. Water quality indicator
light red ashing when
ushing.
2. When opening the
faucet to ushing, the
water quality indicator will
be ashing according to
the current water quality.
User takes
water
Water making acon
Always light on
(based on lter
lifeme display)
Always light on accord-
ing to the current water
quality
Standby
The machine stops making
water and goes into standby
mode.
Always light on
(based on lter
lifeme display)
Go out
Fault
The whole machine does
not work
See part 6.6

Ecosoft CROSS 90 Specifications

General

Brand	Ecosoft
Model	CROSS 90
Category	Water Filtration Systems
Language	English