Ecosoft CROSS 90 - Filter Indicators; Filter Installation; Before Commencing Installation

7
EN
INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2023
2. SPECIFICATIONS AND COMPONENTS
3. FILTER INSTALLATION
2.4 REVERSE OSMOSIS FILTER INDICATORS
1 – System performance indicator - making water indicaon, water quality indicaon, faults
indicaon, ushing indicaon
2 – RO replacement lter lifeme indicator
3 – CB replacement lter lifeme indicator
4 – CF replacement lter lifeme indicator
5 – Faucet indicator - making water indicaon, faults indicaon, replacement indicaon, ushing
indicaon
5
Before installing a domesc reverse osmosis lter please carefully read this instrucon.
This system must be installed in compliance with local codes.
3.1 BEFORE COMMENCING INSTALLATION
1) Check that all parts are in the package. Do not open the plasc bags with lter parts before you
make sure everything is in place to be able to return faulty/incomplete package.
2) Check conformity of your local variables to requirements specicaons:
Main pressure* Supply water temperature*
Check water pressure at mains before install-
ing the product. Compare to the requirements
in paragraph (2.1).
Check temperature of supply water. Compare
to the requirements in paragraph (2.1).
*Refer to paragraph 2.1 for recommended measures in case any of the above variables
does not meet the requirements.
1
2
3
4