Device Setting: you can select sensor type
to match your sensor on hand. If the sensor
you have is same as the one showed here,
you should check this option so that gateway
GW1100 can interpretate correct rain and
wind speed data from the sensor.
Auto Time Zone: if you have set up your
account on www.ecowitt.net for your time
zone , then the gateway will synchronize the
time zone setting automatically with this
setting turned on. If not, then you should set
the time zone manually as listed below.
Time zone and Date is important for rain
calculation as the correct time and date is
obtained.
To Next Page
Loading...
