8. Web UI On WS6210
The Web UI is an essential tool for managing the device. You can use it to
check the network connection status, set up weather services (WU, WOW,
Weather Cloud, custom server), view live data, manage sensors, make
calibrations, manage SD card files, and more.
How to Access the Web UI:
Make sure WS6210 is unlocked. Holding the AP Button for 5 seconds
will turn on its Wi-Fi AP for 5 minutes. Connect to the WS6210's AP.
Enter 192.168.4.1 in the browser. Log in with the default username and
password, which are blank.
If your gateway is connected to a local network, the WebUI can also be
reached via the IP address the gateway has received or has been
configured:
http://IP-address-of-the-gateway (e.g. http://192.168.1.123)
Settings changes, such as registered Sensor IDs, are saved three minutes
after power-up. However, changes made via the web interface are saved
immediately and retained even if power is lost.
8.1 Local Network
This page supports viewing or setting：
(1) MAC address
(2) WLAN: WLAN is the function of the gateway's Wi-Fi connection
router, which is disabled by default
Note: Make sure to deactivate the WLAN when the system is powered up
by the solar panel.
To Next Page
Loading...
