12. Optional Sensors
The product supports receiving data from various sensors, which can be
used with the Ecowitt server for enhanced data services. The RF
reception function will always be turned on to receive data from all
registered sensors anytime.
12.1 Sensor Data Reception Priority
Please note that data processing is prioritized when there is more than one
sensor array or a rainfall sensor for outdoor temperature, wind, rain and
solar data where applicable registered in the gateway (sensor hierarchy).
Sensor Array Priority:WS85>WS90>WS80>WS68>WS69.
Piezo rainfall priority: WS85>WS90
Traditional rainfall Priority: WH40>WS69.
12.2 Sensors
The following sensors can be purchased separately. For more information,
please visit our website: http://www.ecowitt.com. Select the model of the
units with the same RF frequency as your gateway or display (the
frequency is different for various countries because of regulations).
Notes:
(1) The max QTY in the following table indicates the maximum number
of the same sensor model or type that can be connected to the WS6210.
(2) Theoretically all the different sensor arrays (WS68, 69, 80, 85, 90)
could be connected to one gateway at the same time, but due to the sensor
hierarchy (see above) this would only make sense in a few special cases
(e.g. WS85 + WS68 (get solar data from WS68). WS85 or WS90 + WS69
(get traditional rain data from the WS69).
To Next Page
Loading...
