To Next Page

To Previous Page

Using BIOS

Press <Esc> to return to the main menu setting page.

Resume On RTC Alarm (Disabled)

The system can be turned off with a software command. If you enable this item, the

system can automatically resume at a fixed time based on the system’s RTC (realtime

clock). Use the items below this one to set the date and time of the wake-up alarm.

You must use an ATX power supply in order to use this feature.

EUP Support (Enabled)

When enabled, system can not resume by some devices (PCI/PCIE/PME/Ring/RTC,

etc) at S5 state. You can use this item to save power.

Questions and Answers:

Need help?

Do you have a question about the ECS MCP61M-M3 and is the answer not in the manual?

ECS MCP61M-M3 Specifications

General

Number of memory slots	2
Maximum internal memory	8 GB
Processor socket	Socket AM3
Processor manufacturer	AMD
USB 2.0 connectors	3
Power fan connector	Yes
Number of SATA connectors	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Audio chip	VIA VT1705
Power source type	ATX
Audio output channels	6.1 channels
Motherboard form factor	micro ATX
BIOS memory size	64 Mbit