41
Using BIOS
Press <Esc> to return to the main menu setting page.
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.
• System Temperature
• CPU Fan Speed
• CPU Vcore
• VDIMM
• VCC3
• 3VSB
• VBAT
• CPU Tcontrol
Frequency/Voltage Control
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Frequency/Voltage Control
Help Item
Options
Disabled
Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
Auto Detect DIMM/PCI CIK Enabled
Spread Spectrum Enabled
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Press <Esc> to return to the main menu setting page.
Spread Spectrum (Enabled)
If you enable spread spertrum, it can significantly reduce the EMI (Electro-Mag-
netic interface) generated by the system.and voltage according to its temperature.
Case Open Warning (Disabled)
This item enables or disables the warning if the case is opened up, and the
itembelowindicates the current status of the case.
Chassis Opened (No)
This item indicates whether the case has been opened.
Press <Esc> to return to the main menu setting page.
To Next Page
Loading...
Need help?
General
