EDAN FTS-3 - Installing FTS-3 on a Roll Stand;Trolley

FTS-3 Fetal Telemetry System Service Manual Installation
- 11 -
4. Hang the wall mounting board on the hook of the outer wall mounting board and fix the connecting board
and the outer wall mounting board with one M3*6 pan head screw.
Figure 2- 3
3.4.3 Installing FTS-3 on a Roll Stand/Trolley
FTS-3 can also be used with MT-803.
1. Stick the Velcro fixing tape on the bottom of the base station.
Figure 2- 4
挂墙连接板
挂墙外板
Press riveting SUS304hook
Wall
M3*20 pan head cap screw
Outer wall mounting board
Opposite press riveting M3 bolt
理邦保密文件
EDAN CONFIDENTIAL