FTS-3 Fetal Telemetry System Service Manual Disassembling FTS-3
- 29 -
Figure 10- 2
3) Use a screw driver or a pair of pliers to push the fuse up from the bottom of the
container.
Figure 10- 3
4) Take the fuse out and replace it with a new one that is supplied by the manufacturer or
of the same specifications.
10.3 Disassembling the Base Station
The main unit consists of two major parts: upper assembly and lower assembly.
理邦保密文件
EDAN CONFIDENTIAL
To Next Page
Loading...
