EDAN FTS-3 - Page 36

FTS-3 Fetal Telemetry System Service Manual Disassembling FTS-3
- 30 -
Figure 10- 4
Perform the following steps to disassembly the base station:
(1) Place FTS-3 upside down on a flat surface covered with cloth or another type of
protecting pad.
(2) Remove the screws of the battery compartment using a cross-head screw driver.
Figure 10- 5
(3) Remove the battery compartment and take the battery out.
FTS-3 upper assembly
FTS-3 lower assembly
理邦保密文件
EDAN CONFIDENTIAL