EDAN FTS-3 - 10.4 Disassembling the Upper assembly

FTS-3 Fetal Telemetry System Service Manual Disassembling FTS-3
- 32 -
Figure 10- 8
No.
Part
1
Upper Assembly
2
Power connecting line to indicative light board
3
Lower Assembly
4
Main board connecting line to indicative light board
(7) Disconnect the cables/wires to separate the two parts.
NOTE:
The interfaces of the connecting line are fixed with the melt adhesive. Please drop alchol
and remove the melt adhesive with a pair of pliers. And the remove the pull out the
connecting line.
1 2 3
4
理邦保密文件
EDAN CONFIDENTIAL