Vital Signs Monitor User Manual Basic Operation
- 21 -
New Patient, to create new patient for spot-checking mode only
Select Patient, to select patient for Ward round mode only
3.2.1.2 Shortcut Keys
A shortcut key is a configurable graphical key, located at the bottom of the main screen. It gives
you fast access to functions. The selection of shortcut keys available on your monitor depends on
your monitor configuration and on the options purchased. Enter into Menu > User Maintain >
Common > Shortcut to choose and configure.
In monitor mode, the displayed keys are: Alarm Mute, Admission, Review, NIBP measurement,
General, Standby mode, Record, Barcode scanning, Night Mode and Score.
In Ward round mode, the displayed keys are: Review, NIBP AVG, NIBP measurement, General,
Standby mode, Barcode scanning and Score.
In spot-checking mode, the displayed keys are: Record, Review, NIBP AVG, NIBP measurement,
General, Standby mode, Barcode scanning and Score.
Audio alarm paused/off Quickly admit a patient
Enter score interface NIBP measurement
General setup Standby mode
Record output NIBP average measurement
Review (in monitor or
spot-checking mode)
Night mode
Barcode scanning Review (in Ward round mode)
Select this item by the rotary
knob to enable the touch
screen operation
3.2.1.3 Hardkeys
A hardkey is a physical key on a monitoring device, such as the main menu key on the front panel.
Refer to the illustration in Front View for more information.
To Next Page
Loading...
