EDAN iM3 User Manual

Vital Signs Monitor User Manual Alarm Information
- 65 -
Message Cause
Auto Measuring
In automatic measuring mode
AVG Measuring
In average measuring mode
Measurem. Canceled
Press the “Start/stop NIBP measurement” button to stop
the measurement.
Calibrating
During calibrating
Calibrat. Canceled
Calibration is over.
Leak. Test Running
The leakage test is in process.
Leak.Test Canceled
Pneumatic test over
Resetting
NIBP module in resetting
Please Start
NIBP module is in idle status.
Done
NIBP measurement is completed.
Measure time out
No measuring result after the module entering Predict
state for 30 s.
TEMP Is Warming Up
User takes the sensor out of the bracket and TEMP is
warming up
Warm-up Over
The monitor displays this message after taking the sensor
out of the bracket and warm-up is over.
Predict Over
After the Predict measuring is over, the data and message
display on the interface.
Incomplete parameter input,
unable to score
In Warning-Score System interface, parameters are not
completely input.
No WIFI module detected
No Wi-Fi module is detected.
Quick Predict Over
Quick prediction measurement is completed.
PlaceProbeOnMeasurePlace
Probe isn’t placed on the measurement site.
9.4 Adjustable Range of Alarm Limits
SpO
2
alarm limits are listed as follows (unit %):
Adjustable Range
SpO
2
20~100

EDAN iM3 Specifications

General

Brand	EDAN
Model	iM3
Category	Monitor
Language	English