C
HAPTER
1
| Introduction
Description of Hardware
– 27 –
SFP TRANSCEIVER SLOTS
The following table shows a list of transceiver types that have been tested with
the switch. For an updated list of vendors supplying these transceivers, contact
your local dealer. For information on the recommended standards for fiber optic
cabling, see “1000 Mbps Gigabit Ethernet Collision Domain” on page 50.
Table 1: Supported SFP Transceivers
Media Standard Cable Diameter
(microns)
Wavelength (nm)
Maximum Distance
*
* Maximum distance may vary for different SFP vendors.
1000BASE-SX 50/125 850 550 m
62.5/125 850 400 m
1000BASE-LX 50/125 1300 550 m
62.5/125 1300 550 m
9/125 1300 10 km
1000BASE-LH 9/125 1310 35 km
1550 80 km
1000BASE-T n/a n/a 100 m
To Next Page
Loading...
Need help?
General