To Next Page
K
Katherine Nichols MDAug 1, 2025
What to do if the Link LED is off on my Edge-Core ES3528M Switch?
- AApril WoodAug 1, 2025
If the Link LED is off on your Edge-Core Switch, ensure that both the switch and the connected device are powered on. Also, verify that the cable is securely plugged into both the switch and the corresponding device. Confirm that you are using the correct cable type and that its length does not exceed the specified limits. Inspect the adapter on the attached device and the cable connections for any defects. If necessary, replace any defective adapter or cable.
General
