Edge-Core ES4308-POE User Manual (English)

Other manuals for Edge-Core ES4308-POE

Questions and Answers:

Lisa MartinJul 29, 2025

What to do if the Link LED is off on my Edge-Core Switch?

J
James ScottJul 29, 2025
If the Link LED on your Edge-Core switch is off, ensure both the switch and the connected device are powered on. Check that the cable is securely plugged into both the switch and the device. If the switch is in a rack, inspect connections to the punch-down block and patch panel. Ensure the correct cable type is used and that its length is within specified limits. Inspect the adapter on the connected device and cable connections for any defects, and replace any defective components as necessary.

Brand	Edge-Core
Model	ES4308-POE
Category	Switch
Language	English

Brand

Edge-Core

Model

ES4308-POE

Chapter 1: Introduction

Description of Software Features

Overview of the switch's advanced performance features and management capabilities.

Key Network Concepts

Covers Static Addresses, IEEE 802.1D Bridge, Store-and-Forward Switching, Spanning Tree, and VLANs.

Advanced Network Services

Details on Traffic Prioritization, LLDP, and Power over Ethernet (PoE) capabilities.

Chapter 2: Initial Configuration

Configuration Procedure

Step-by-step guide for setting up the switch's IP address and initial network parameters.

Chapter 3: Configuring the Switch

Web Interface Operations

Guides on accessing the web interface, navigation, home page, and configuration options.

Port and Trunk Management

Configuration of switch ports, port mirroring, diagnostics, and trunking with LACP.

VLAN Configuration

Steps for creating, modifying, and assigning members to Virtual LANs (VLANs).

Security and Protocols

Covers 802.1X authentication, LLDP, and RSTP for network security and loop prevention.

QoS, SNMP, and PoE Management

Configuration of Quality of Service (QoS), SNMP, and Power over Ethernet (PoE) settings.

Appendix A: Software Specifications

Software Features Overview

Lists key software features including authentication, port configuration, flow control, and VLAN support.

Management Features and Standards

Details management features, supported standards, and management information bases.

Management Information Bases

Lists the Management Information Bases (MIBs) used for SNMP management.

Appendix B: Troubleshooting

Forgot or Lost Password

Procedure to reset the switch to factory defaults if the administration password is forgotten.

Changing a PC's IP Address

Instructions for modifying a PC's IP address on different Windows operating systems for network access.

Edge-Core ES4308-POE User Manual

Table of Contents