6. OPERATIONS AND ILLUSTRATIONS V-65E-A
6-18
6.3.3.3 System function / enter password“258”
Parameter description︰This function according to the necessaries of the
operator provides selections to them. “Continue
machining” means the quantity of a new material
can be machined over one piece. But if a new
material can be machined to one piece only,
which named “One Piece Machining”.
1.2M Generally value：
Setting range ：
NO
1.5M Generally value：
Setting value ：
Parameter description︰This bar feeder provides multi languages to select
according to different requirements.
At present provide︰ Chinese character/English / Simplified Chinese
character
Home page
1.2M Generally value：
Setting range ：
NO
1.5M Generally value：
Setting value ：
Parameter description︰To verify the version number of PLC and HMI
programs.
Home page
1.2M Generally value：
Setting range ：
NO
1.5M Generally value：
Setting value ：
To Next Page
