13
Product Updates
1 Open the Update Agent 1.0 program, located on the desktop.
2 Connect device to the computer using the supplied USB Cable.
(Update Agent 1.0 will automatically search for updates related to the device.)
3 Click the Update button.
(The update process will start and nish automatically. Once the
update is complete, you may be directed to the Online Store. To
further update your device using the online store, refer to the
following steps.)
4 Click on any or all of the available options.
(A check mark will appear in the upper right corner.)
5 Click the Purchase button.
6 If required, read and Accept the disclaimer.
7 Fill in the required information and click Go to Review.
(Here you can check the info you entered before submitting.)
8 Click the Place Order button to complete you order.
9 If a purchase was made, follow steps 1-3 above to complete the
update.
This device has the ability to update via a USB connection or
a wireless connection. Refer to the following information for
USB updates. Refer to the Check for Updates feature under the
Settings section for more information on wireless updates.
1
2
NOTE: A warranty is available to protect the hardware and mechanical
components of your CTS3 device in the Online Store.
To Next Page
Loading...