Edge INSIGHT CTS3 - Restore Default Settings; Alert Settings

22
Unit of Measure
Restore Default PIDs
Restore Default Settings
Alert Settings
SETTINGS
SETTINGS
1
Use this setting to restore the device back to the factory settings.
1 Select the Restore
Default Settings
option.
2 Press continue
to restore all user
settings to the factory
default values.
NOTE: This will NOT restore your vehicles’ factory data or unmarry the
tool from your vehicle.
Restore Default Settings
Alert Settings
Use this setting to globally turn on/o󰀨 gauge alerts
1
1 Select the Alert
Settings option.
2 Turn the setting
ON or OFF using the
toggle switch.
3 Select Exit to
return to the Settings
menu.
Unit of Measure
Restore Default PIDs
Restore Default Settings
Alert Settings
SETTINGS
SETTINGS
1
2
3