Edge INSIGHT CTS3 - Wi-Fi Setup & Updates

18
2
Powerteq
PowerteqGuest
SETTINGS
WI-FI SETTINGS
Display Settings
Keyline Color Setting
Audio Settings
Wi-Fi Setup
SETTINGS
SETTINGS
Wi-Fi Setup
1 Select the Wi-Fi
Setup option. A list of
available networks will
appear.
2 Select the network
that you would like to
connect the device to.
A green check mark
will appear when the
device is connected.
1
This device is equipped with the ability to connect to and update over
a secure Wi-Fi connection. For more information on how to check for
updates, refer to the Check for Updates section of this manual.
TIP: Select the exit button
to return to the gauges.
3 Use the keypad
to enter the network
password, then press
Enter. Note that most
networks are case
sensitive.
3
Enter Wi-Fi Password
Password
NOTE: You may
need to put in an
Email address
before connecting
to a network. Put in
the same email you
registered the device
with.
2
3