32
Recording
Use the recording option to log and save vehicle data.
1 While the Gauge Screen is in view. Open the pull down menu by
swiping downward starting from the top of the screen.
2 Press the Record button to start the recording process. When the
desired amount of information has been gathered, press the Stop button.
DataViewer Download
This windows software allows OBDII data logs that were recorded with
the Edge Products tuner to be opened and viewed. This software can be
downloaded from the Edge Products website.
1 Go to: www.edgeproducts.com
2 Click the UPDATES tab located at the top of the page.
3 Select the DOWNLOAD button under DataViewer software.
4 Click the RUN button on the pop-up menu.
5 Follow the on-screen instructions.
NOTE: The LED
above the recording
icon will shine red
during the
recording.
Record Stop
To Next Page
Loading...
General