Edimax HP-5101AC - 3.3 Creating an Encrypted Powerline Network with Two Adapters

7

3.3CreatinganEncryptedPowerlineNetworkwithTwoAdapters

Oncebothadaptershavebeensuccessfullyconnected,pressthe“Group/Reset”button
ofeachadapterforlessthan3secondswithin2minutes.Theadapterswill
automaticallygeneratearandompasswordtoencryptthepowerlinenetwork.



Note:
z Toaddadditionaladaptersintotheencryptedpowerlinenetworkortoremove
anadapterfromthepowerlinenetwork,pleaserefertotheChapter6inthe
manual
z Ifthepowerlineadapterinyournetworkdoesnotfeaturea“Group/Reset” or
an“Encrypt”button,youcanusetheutilitysoftwareasanalternative.For
moredetailspleaserefertoChapter5 inthemanual.