59
2.4.4 UPnP
When UPnP function is activated, all UPnP-compatible computers / network
devices will be able to discover this IP camera automatically (only those in the
same local network).
This function is useful and you don‟t have to remember the IP address of this
IP camera. Simply open „Network neighbor‟ and it‟s there!
The descriptions of every setting in this menu will be given below:
Select „Enable‟ to activate UPnP function of this IP
camera, select „Disable‟ to disable it.
Click „Apply‟ to save settings and make the new settings take effect.
After UPnP function is activated, a popup message will appear:
To Next Page
Loading...
