98
3-3-1-1 „Camera‟ tab
In this tab you can configure all cameras you wish to connect. Up to 16
cameras can be connected simultaneously:
Here are the descriptions of all setting items:
Select the channel number you wish to set.
All cameras found on your local network will be displayed
in „Camera Search‟ box.
Select a camera listed in „Camera Search‟ box, and click
„Select‟ button to fill all parameters of selected camera in
every camera configuration fields.
Rescan all cameras on your local network. If you didn‟t
see the camera you expected in „Camera Search‟ box, or
new cameras has been joined to your local network after
last scan.
Input the name of camera here. Default value is the first 6
bytes of camera‟s MAC address, you can change the
name of camera so you can remember the camera‟s
location of purpose easily.
Displays the model of selected camera, this field can not
be changed.
To Next Page
Loading...
