44
2.2.5 Night Vision
This camera equips with 9 IR LEDs to enhance video quality in the night.
You can enable or disable IR LEDs by „Night Vision‟ menu:
The descriptions of every setting in this menu will be given below:
Do not use IR LEDs, even it‟s very dark.
Turn IR LEDs on, even it‟s very bright.
Let camera decide to switch LED lights on or off
automatically: LEDs will light up when it‟s too
dark. If you don‟t know which option you should
select in this page, select this one.
Turn on/off IR led by
schedule
Switch IR LEDs on or off by schedule. You have
to input start time in „Turn on IR led from‟
section, and end time in „Turn off IR led from‟
section.
Click „Apply‟ for settings to take effect.
To Next Page
Loading...
