58
2.4.4 UPnP
When UPnP function is activated, all UPnP-compatible computers / network
devices will be able to discover this network camera automatically (only those
in the same local network).
This function is useful and you don‟t have to remember the IP address of this
network camera. Simply open „Network neighbor‟ and it‟s there!
The descriptions of every setting in this menu will be given below:
Select „Enable‟ to activate UPnP function of this network
camera, select „Disable‟ to disable it.
Click „Apply‟ to save settings and make the new settings take effect.
After UPnP function is activated, a popup message will appear:
To Next Page
Loading...
