Edimax IC-7110 - Configure Network Camera Surveillance Software; Configure Cameras

97
3.3 Configure network camera surveillance software
3.3.1 Configure cameras
Before you use this network camera surveillance software, you must configure
the camera(s) you wish to connect. Please click „System configure‟ button
and a popup menu will appear:
Please select „Configure Cameras‟ to configure cameras:
Note: If you’re prompted by a windows security alert which asks you if
you want to block ‘IPCamViewer’ program, please click ‘Unblock’
button, of IP camera surveillance software will not be able to function
correctly.