SMTP enable
SSLv2/v3
function
Select „Enable‟ if your SMTP server supports SSLv2/v3
such as gmail.
Some SMTP server requires mail senders to be
authenticated before they can send Email. If your SMTP
server requires you to do so, please select „Enable‟, or
select „Disable‟ to disable it. If you don‟t know, please
refer to the SMTP server you‟re using in your Email
software (like Outlook, Outlook Express etc.), or ask your
network administrator or ISP.
Please input the user name of SMTP server here, if your
SMTP server requires the use of authentication.
Please input the password of SMTP server here, if your
SMTP server requires the use of authentication.
Click „Apply‟ to save settings and make the new settings take effect.
After that, you can click „Send a test email‟ to send a testing Email to the
address you set here, so you can make sure the setting you specified here is
correct and working.
To Next Page
