Select „Enable‟ to send the Schedule Snapshot to the
appointed e-mail address, or select‟ Disable‟ to disable
this function. You have to configure e-mail settings in
„Email‟ menu first, so this function will take effect.
This option allows the network camera to send one
image according to the time interval you wish.
Enable Schedule
Recording
Select „Enable‟ to enable schedule recording, or select
„Disable‟ to disable this function.
This option allows the network camera to send one
recording file according to the time interval you wish.
This option allows you to adjust the recoding time based
on your preference.
Note: The available recording time is based on the video
resolution and video frame rate settings in ‘Video’ menu.
Send Recording
File to FTP
Select „Enable‟ to send the recoded video to the
appointed FTP server, or select‟ Disable‟ to disable this
function. You have to configure FTP server parameters in
„email & FTP‟ menu first, so this function will take effect.
This option allows you to choose to upload each
recorded video with different file name composed of
date/time, or to choose to upload the recorded video with
the same file name you wish. If you choose the latter, the
prior-saved recorded video will be overwritten by the
latest recorded video.
Send Recording
File to E-Mail
Select „Enable‟ to send the recorded video to the
appointed e-mail address, or select‟ Disable‟ to disable
this function. You have to configure e-mail settings in
„email & FTP‟ menu first, so this function will take effect.
To Next Page
Loading...
