95
You can put the mouse cursor on a certain component and see its button name,
and here‟re detailed descriptions of all buttons:
The image of all connected cameras will be displayed
here.
Select a language from this dropdown menu to change
display language.
Change camera image display layout (Click a layout icon
to change camera display layout). There are 8 kinds of
available display layouts.
Click this button to switch to full screen mode (only
display all camera‟s image), press „ESC‟ key to quit full
screen mode.
Click this button and the network camera surveillance
software will switch displaying the image of all connected
camera automatically. Click this button once to activate
scan function (scan icon will become blue ), click
again to stop scanning (scan icon will become white ).
Zoom-out (To see more objects).
This function is only available for supported cameras.
Zoom-in (Too see more details).
This function is only available for supported cameras.
There are 8 directions in PTZ control ring. If the camera
you connect support PTZ, you can use PTZ control ring
to change the direction that camera points to.
This function is only available for supported cameras.
Click this button to return the camera to „Home‟ (default)
position.
This function is only available for supported cameras.
Software / camera configuration.
To Next Page
Loading...
