Edirol V-4 - Page 73

73
Changing the video fader orientation
If you attempt to rotate the vide fader panel further than 90 degrees, the internal cable may be
damaged. Note the location of the triangle symbols, and do not rotate the video fader panel further
than 90 degrees.
To remove the screws, use a screwdriver that matches the screw heads, and work carefully. If the
screw heads become damaged, you will be unable to fasten the video fader in place.
V-4_e.book 73 ページ ２０１０年３月１１日 木曜日 午後１時５１分