This product has been manufactured under a quality system certified to ISO9001:2008
Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble
the technical file, that the product(s)*
B812 XXXXX nEXT 240D
B813 XXXXX nEXT 240T
to which this declaration relates is in conformity with the following standard(s) or other normative
document(s)
EN ISO 12100-2: 2003 Safety of Machinery. Basic Concepts, General Principles for
+ A1: 2009 Design. Technical Principals
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
EN61010-1: 2010 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory
Use. EMC requirements. General requirements.
EN50581:2012 Technical Documentation for the Assessment of Electrical and Electronic
Products with respect to the Restriction of Hazardous Substances
C22.2 61010-1-04: 2004 Safety requirements for electrical equipment for measurement,
Control and laboratory use – Part 1: General requirements
UL61010A: 2002 Safety requirements for electrical equipment for measurement,
Control and laboratory use – Part 1: General requirements
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
2011/65/EU
†
Restriction of Certain Hazardous Substances (RoHS) Directive
* The material numbers cover a family of pumps where the following component features may vary according to the
variant; ‘X’ denotes combinations of variants of the geometry of pump inlet ports, geometry or position of exhaust
port and the material and geometry of the pump casing.
†
i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive
does not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
21.11.2013, Burgess Hill
Mr Peter Meares, GV Technical Support Manage
To Next Page
Loading...
Need help?
General
