Edwards STP-XA2703 Series - Accessories

STP Series Turbomolecular Pump
MT-00E-001-M
Page 56
SERVICE, SPARES AND ACCESSORIES
8
8.4 Accessories
The following is a list of accessories that can be purchased by contacting Edwards.
Items
Application purpose
Remarks
Instruction Manual (A)
*1
Generic Instruction Manual
This manual
Instruction Manual (B)
*1
Pump Specific Information
Instruction Manual (C)
*1
Control unit Instruction Manual
applicable to your STP pump
STP control unit
For control the STP pump
Refer to the STP Pump
Instruction Manual (B) for the
applicable STP control unit.
Power cable
Primary input power
Standard cable length is 5 m
(max. 30 m). Contact Edwards
for further information.
STP connection cable
Connection cable between the STP
pump and the STP control unit
Standard cable length is 5m
(max. 30 m). Contact Edwards
for further information.
TMS unit
*2
Control the STP pump temperature
Except STP-301/451 series
Except STP-L301/L451 series
Except STP-603/1003 series
Air-cooling unit
*2
For cooling the STP pump
Vibration damper
*2
For vibration removal of the STP pump
*1 STP pump consists of the three-volumed Instruction Manuals.
*2 Optional accessory