EASZ-2 Manual v1.12 - 12.2.2018 Page 28 / 30
8.3.3. RS Connection Box
The RS Connection Box is used to help make configuration of
units on RS485 buses easier and quicker rather than opening
individual units (standard and pre-wired option).
8.4. Spare Parts
Only spare parts from the manufacturer can be used for repairs, otherwise this invalidates the warranty
and the whole product. Only a trained and authorised person is permitted to replace spare parts.
Individual spare parts and accessories can only be ordered from the manufacturer. To order spare parts
use the numbers that are shown below.
Control Board with Display Assembly
Connection Cable Wide (14 pin)
Connection Cable Narrow (6 pin)
Body Cover with Glass Viewer
Grub screw (M4 x 8mm internal Allen key)
To Next Page
Loading...
General