EET PMC-33M-A User Manual

CET Electric Technology
51
5.8.4 Setpoints Setup
Register
Property
Description
Format
Range, Default*
6500
RW
Setpoint #1
Setpoint Type
UINT16
0=Disabled*
1=Over Setpoint
2=Under Setpoint
6501
RW
Parameters
1
UINT16
0* to 24
6502
RW
Over Limit
2
Float
0*
6504
RW
Under Limit
2
Float
0*
6506
RW
Active Delay
UINT16
0 to 9999 s, 10*
6507
RW
Inactive Delay
UINT16
0 to 9999 s, 10*
6508
RW
Trigger Action 1
3
UINT16
0* to 2
6509
RW
Trigger Action 2
3
UINT16
…
…
…
6580
RW
Setpoint #9
Setpoint Type
UINT32
0=Disabled*
1=Over Setpoint
2=Under Setpoint
6581
RW
Parameter
1
UINT16
0* to 24
6582
RW
Over Limit
Float
0*
6584
RW
Under Limit
Float
0*
6586
RW
Active Delay
UINT16
0 to 9999 s, 10*
6587
RW
Inactive Delay
UINT16
0 to 9999 s, 10*
6588
RW
Trigger Action 1
2
UINT16
0* to 2
6589
RW
Trigger Action 2
2
UINT16
Table 5-28 Setpoint Setup Parameters
Notes:
1) The PMC-33M-A provides the following setpoint parameters:
Key
Parameter
Key
Parameter
Key
Parameter
0
None
9
PF Total
18
Voltage TEHD
1
Uln (Any Phase Voltage)
10
kW Total Present Demand
19
Current THD
2
Ull (Any Line Voltage)
11
kvar Total Present Demand
20
Current TOHD
3
Current (Any Phase
Current)
12
kVA Total Present Demand
21
Current TEHD
4
In (Calculated)
13
kW Total Predicted Demand
22
Voltage Unbalance
5
Frequency
14
kvar Total Predicted Demand
23
Current Unbalance
6
kW Total
15
kVA Total Predicted Demand
24
Phase Reversal
4
7
kvar Total
16
Voltage THD
8
kVA Total
17
Voltage TOHD
Table 5-29 Setpoint Parameters
2) For Over Setpoint, the setpoint parameter must exceed the Over Limit to become active and go
below the Under Limit to become inactive.
For Under Setpoint, the setpoint parameter must go below the Under Limit to become active and
exceed the Over Limit to become inactive.
3) The PMC-33M-A provides the following Setpoint Triggers:
Key
Action
0
None
1
DO1 Closed
2
DO2 Closed
Table 5-30 Setpoint Triggers
4) When the Setpoint Parameter is set to Phase Reversal, the Setpoint Type must be set to 1 (Over
Setpoint), and there is no need to set Over Limit and Under Limit. Please be informed that the
Phase Reversal Setpoint assumes that the phase sequencing is based on Positive or Clockwise
rotation (ABC).

EET PMC-33M-A Specifications

General

Brand	EET
Model	PMC-33M-A
Category	Measuring Instruments
Language	English