efacec EFAPOWER EV HC G3 - 2 General Characteristics; 2.1 Technical Characteristics

E F A P O W E R EV- H C - I N S T A L L A T I O N A N D U S E R M A N U A L
3 | 28
2 GENERAL CHARACTERISTICS
2.1 TECHNICAL CHARACTERISTICS
EFAPOWER EV-HC station technical characteristics are indicated in Table 1.
Table 1 – EFAPOWER EV-HC Technical Characteristics
Central Command Unit
User Interface
User Identification
(optional)
Contactless RFID Card (Mifare) ISO14443
Outputs
CE and GB Units
Nominal Input
Phases/Lines
1 line + neutral + earth
3 line + neutral + earth
Voltage
(230 ± 10%) Vac
(400 ± 10%) Vac
Current
16 A
32 A
16 A
32 A
Power
3,7 kVA
7,4 kVA
11 kVA
22 kVA
Frequency
(50 ± 10%) Hz
Output
Connector
CE Units: Type 1 according to EN 62196-1
CE Units: Type 2 according to EN 62196-2
GB Units: Mode 3 according with
GB/T20234.2
CE Units: Type 2 according to EN 62196-2
GB Units: Mode 3 according with
GB/T20234.2
EV Connection to EVSE
CE units: EN 61851-1 and IEC 61851-1 Case B and IEC 61851-1 Case C
GB units: GB/T 18487.1 Case C
Outlet Protection
Over-current (not
included)
20 A
40 A
20 A
40 A
RCD
30 mA
Charging Mode
Direct connection
between the EV and the
EVSE using the cable
supplied with the vehicle.
CE units: EN 61851-1 e IEC 61851-1 Mode 3
GB units: GB/T 18487.1 Mode 3
Energy metering
(optional)
Yes
Mechanical
Characteristics
Dimensions(WxDxH) mm
300x156x169 mm
320x156x224 mm
Architecture
Standalone box equipped with one output
Weight
from 4kg to 7kg (depending on the output)
Environmental
conditions
Degree of protection
IP 54
Temperature
Natural cooling (Range -30˚C to +50˚C)
Humidity
Range 5% to 95%
Installation site
Outdoor/Indoor
Specifications are subject to change, without prior notice.