Need help?Do you have a question about the efacec EFAPOWER EV-QC45 and is the answer not in the manual?
General| Product Type | DC Fast Charger |
|---|---|
| Power Output | 45 kW |
| Charging Standards | CCS, CHAdeMO |
| Input Voltage | 400 V AC |
| Output Current | 125 A |
| Connector Types | CCS, CHAdeMO |
| Efficiency | >94% |
| Cooling Method | Liquid Cooled |
| Operating Temperature | -30°C to +50°C |
| Ingress Protection | IP54 |
| Number of Outputs | 2 |
| Protection Features | Overcurrent, Overvoltage, Overtemperature, Short Circuit |
| Communication Interface | OCPP 1.6 |
| Dimensions | 800 x 600 x 1900 mm |
Details the technical specifications of the EFAPOWER EV-QC45 charging station.
Lists the applicable standards the EFAPOWER EV-QC45 complies with.
Specifies environmental conditions, site restrictions, and verification steps.
Covers wiring information, surface preparation, resources, and final site checks.
Details procedures for packaging, visual inspection, handling, and anchoring the station.
Lists checks to perform before switching on the charging station.
Provides instructions and warnings for switching on the EFAPOWER EV-QC45.
Describes CHAdeMO, CCS, and AC connectors, including their types and handling.
Details charging operation, screen savers, LEDs, and specific interface sequences.
Lists common errors and messages that occur during the charging station's power-up sequence.
Provides a schedule and procedures for preventive maintenance tasks.
Describes common issues that can occur between the charger and the vehicle.
To Next Page
