Need help?Do you have a question about the efacec EFAPOWER EV HC G3 and is the answer not in the manual?
Explains the usage of the 'i' symbol for important notes.
Explains the usage of the '!' symbol for warnings and safety observations.
Explains the usage of the lightning bolt symbol for electric shock hazards.
Details the technical specifications of the EFAPOWER EV-HC station.
Lists the applicable standards and directives the EFAPOWER EV-HC station complies with.
Details environmental specifications for reliable operation, including IP rating and temperature limits.
Specifies conditions like clearance, input power cables, and mounting location for the unit.
Outlines checks for site compliance with clearance and protection requirements.
Details requirements for preparing the installation site, including wiring and surface preparation.
Explains power feeding requirements from the distribution board, including wiring and circuit breaker specifications.
Describes how to fix the charging station to a pole or wall using a fixing plate.
Lists necessary fasteners, end terminals, and tools for the installation process.
Covers checks for upstream protection, grounding regime, earth resistance, and distribution board capacity.
Provides guidance on handling, unpacking, and positioning the charging station.
Describes the packaging of the EFAPOWER EV-HC Station for shipping.
Details checks for exterior case, decor, and protective ground connection point after unpacking.
Provides guidance on handling the charging station due to its weight.
Details the physical placement and mounting of the charging station on the wall.
Explains the wall mounting procedure, including screw anchors, height, and drilling layout.
Guides qualified personnel on connecting input AC power cables, ensuring safety and correct grommet usage.
Details the connection of the metallic structure to the protective earth, emphasizing interconnection with the switchboard.
Explains how to establish communication via the X2 terminal, used for connecting to a PC or network.
Details an alternative setup for the communication converter outside the EV-HC unit, using a panel connector.
Lists checks to perform before switching on, including cable tightness, ground resistance, and supply voltage.
Provides critical warnings and instructions for safely switching on the EFAPOWER EV-HC station.
Describes the different types of output connectors (Type 1, Type 2, Type GB) available for charging vehicles.
Details the Mode 3 Type 1 connector and its compatible power rates.
Details the Mode 3 Type 2 connector and its compatible power rates.
Details the Mode 3 Type GB connector and its compatible power rates.
Details the Mode 3 Type 2 outlet and its compatible power rates.
Explains the LED indicators and their meanings for different stages of operation.
Describes the step-by-step process for starting and stopping charging without user authentication.
Details the operation sequences for starting and stopping charging when user authentication is required.
Outlines recommended preventive maintenance tasks, including visual checks and RCD testing, with periodicity and estimated time.
Lists common issues, their causes, and recommended actions to resolve them, often involving LED status checks.
General| Output Current | up to 500 A |
|---|---|
| Efficiency | >95% |
| Cooling Method | Liquid Cooling |
| Operating Temperature | -30°C to +50°C |
| Ingress Protection | IP54 |
| Charging Standards | CCS, CHAdeMO |
| Input Voltage | 400 V AC |
| Max Output Power | 350 kW |
| Number of Charging Outlets | 1 |
| Protection Features | Overvoltage, Overcurrent, Thermal Protection |
| Communication Interface | OCPP 1.6 |
To Next Page
