EFD 2000XL User Manual

3. 2 5
EL3C
The memory feature enables storage of up to eight different time
settings that can be recalled and used at the push of a button. Time
settings are saved even with power removed and will remain in
storage unless changed or erased intentionally. Memory cells are
identified as CEL1 through CEL8 .
Viewing MEMORY cells
Before saving a time setting in memory, view the memory cells to see
which cells are empty or, if all cells are used, which time can be
replaced.
To prevent accidental data loss, review the contents of each cell
before selecting and storing a new time setting into memory.
1. Press RUN/SETUP to place the dispenser in RUN mode (RUN
indicator light on). The current cell number will be displayed. e.g.,
CEL3 . (Figure 1)
2. Press CELL SELECT (up) (down) to select the cell you wish to use.
3. Press RUN/SETUP again to return the dispenser to SETUP mode
(SETUP indicator light on). The time setting stored in the selected
cell will be displayed. (Figure 2)
NOTE: To avoid unintentional loss of stored settings, do not press
STEADY/TEACH in SETUP mode (doing so will clear the previously
stored cell setting). Always return the dispenser to RUN mode after
viewing or changing contents.
Memory
Figure 1
Figure 2

EFD 2000XL Specifications

General

Brand	EFD
Model	2000XL
Category	Dispenser
Language	English