EFILive CM2200 - Licensing Requirements; Dodge Cummins Tuning Option Enabled

Cummins 2010-2018 Quick Start
support@efilive.com - 13 - www.efilive.com
Licensing Requirements
To Flash a Dodge Cummins ECM, the following licensing conditions must be met:
1. For FlashScan V2, the Dodge Cummins Tuning Option must be enabled.
2. FlashScan V2/AutoCal must have an available VIN License (if not already
licensed).
Dodge Cummins Tuning Option Enabled
To ensure that your FlashScan V2 device is licensed to tune Dodge Cummins
vehicles:
1. Connect your FlashScan V2 or AutoCal device to your PC.
2. Open the EFILive Scan and Tune application.
3. Select the [F7: License] option in the left-hand pane.
4. Select [F2: Hardware] to display Tuning License details.
5. To purchase additional Tuning Licenses for FlashScan V2, click on the
Purchase Tuning License Activation Code(s) link to order products. NOTE:
AutoCal Users should contact their tuner before purchasing Tuning Licenses.
6. Enter emailed Activation Code and select Activate.