EFT Z50 - Power On

9
the clasp.
Warning

Before installing the battery, please keep the interfaces at both ends clean, dry, no
metal debris and liquid residue.

Before starting the battery, please ensure that the battery is fully inserted to avoid
flight accidents during operation due to the battery not being tightly connected.

Make sure the battery power is off before inserting or removing the battery.
Power On
Short press the battery power button once, then press and hold it for over 2s, the 5 indicator
lights will flash in sequence, and you will hear two beeps, indicating that the aircraft is powered
on.Repeat the above steps to power off.