EGO Induction Gx User Manual

product operating instruction
E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
document id.: 90.60160.286-001-04-A / state: 230 - released
designation: Induction Gx
page
38
of
43
5.3 Error codes
E.G.O.’s platform concept provides dedicated error codes for a quick and efficient trouble shooting. An
error code always starts with the letters “E” or “ER”:
 Error codes starting with “E…” are included in the induction documentation and including a switch
off the cooking zone.
 Error codes starting with “ER…” are included in the induction documentation and including a switch
off the system.

Refer to the customer documentation of the user interface for details on those error codes.
Error code Description Behavior Remedy
E2 Cooking zone
overheating
Cooking zone
switches off
Switch off cooking zone, remove all cookware
and let the cooking appliance cool down.
Restart the cooking appliance.
If error persists: Exchange generator.
E4 Implausible
configuration
data
Cooking zone
switches off
Exchange generator.
E6 Generator
synchronization
error
Cooking zone
switches off
Check wiring and line connection.
Exchange generator.
E8 Fan error Cooking zone
switches off
Exchange generator.
E9 Temperature
measurement
error
Cooking zone
switches off
Check wiring and line connection.
Exchange generator.
EA Generator error Cooking zone
switches off
Switch off cooking zone, remove all cookware
and let the cooking appliance cool down.
Restart the cooking appliance.
If error persists: Exchange generator.
EC (Er63) Timeout Cooking zone
switches off
Switch off cooking zone, remove all cookware
and let the cooking appliance cool down.
Restart the cooking appliance.
EC (Er64) Software error Cooking zone
switches off
Switch off cooking zone, remove all cookware
and let the cooking appliance cool down.
Restart the cooking appliance.
EF (Er65) Hardware error Cooking zone
switches off
Exchange generator.
U400 Over voltage Cooktop switches off Check wiring.
Exchange generator.
Blinking “H” Fixed coil
temperature
Blinking “H” is
shown on display
Exchange the inductor package.
Exchange generator.
Tab. 8: Error codes and remedies

EGO Induction Gx Specifications

General

Brand	EGO
Model	Induction Gx
Category	Hob
Language	English