EGO Induction Gx User Manual

product operating instruction
E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
document id.: 90.60160.286-001-04-A / state: 230 - released
designation: Induction Gx
page
8
of
43
2 Safety
2.1 Intended use
EGO Induction Gx systems and components properly assembled into the final appliance are intended
for heating food on cookers or hobs in domestic kitchen areas in fixed buildings. EGO Induction Gx
systems and components must be used under a glass ceramic surface with a thickness of 4 mm for
domestic appliances. Any other use is not allowed by default and needs written consent of E.G.O.. EGO
Induction Gx is intended for supervised operation only.
All EGO Induction Gx components are - depending on the respective variant - certified for:
 VDE (for distribution within Europe or in areas where EN 60335 is valid)
 CQC (still in development, for distribution within China)
 UL (still in development, for distribution within USA / Canada)
KC certification (for distribution within Korea) must be done by the appliance manufacturer. Certain Gx
systems are ready for KC certification.
Induction Gx is designed to be controlled by following EGO User Interfaces:
 Knob Control K6 (by request)
 Touch Control Flex (by request)
 Touch Control Lite Slider (by request)
 Touch Control Lite Slider SmartKii
 Touch Control Slim SmartKii
 Touch Control VArio SmartKii
NOTICE! Wrong use of user interface.
Generally, the software of the user interface has always to be adapted to Induction Gx, i.e.
using a user interface which has been designed for another induction won’t work.
Dismantling of Gx heating systems is not allowed unless for repair purposes. For EMC and
safety reasons, it is not allowed to change the cable routing and fixation.
2.2 Staff qualification
These operating instructions are intended for following staff/staff groups:
Staff Required qualification
Electrical and mechanical
skilled staff (research &
development, product
engineering, quality) of the
kitchen appliances
manufacturer
 Has detailed experience in design of electric kitchen appliances
 Has detailed knowledge in valid norms and safety standards
 Has detailed knowledge in using relevant tools and equipment for
the production of electrical appliances
document id.: 90.60160.286-001-04-A / state: 230 - released
view date: 2023-02-15 06:31:04 / user: BENDER

EGO Induction Gx Specifications

General

Brand	EGO
Model	Induction Gx
Category	Hob
Language	English