300781 • 1/2019 • H.S.
44 of 70
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3
5 Commissioning
5.4 Commissioning the device
For commissioning the device proceed as follows:
Open the water supply from the tap water network via the shut-off
valve.
Switch on the mains voltage via the main switch or circuit breaker of
the mains connection (e.g. building connection or mains junction box
e.g. on construction sites).
To operate and perform cleaning work with the high pressure cleaner,
proceed as given in Section 6 (Operation).
To Next Page
Loading...
