300781 • 1/2019 • H.S.
48 of 70
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3
6 Operation
To carry out cleaning work, proceed as follows:
Unlock and pull the trigger lever (4, Fig. 6-2) of the trigger gun.
WARNING
Before activating, hold the trigger gun and the spray lance tightly.
After activation of the trigger gun the emerging water jet exerts a jerky
recoil force (see also Fig. 6 - 3).
This may result in unintentional jerking away from the selected cleaning
object or the trigger gun slipping out of the hand, endangering the life
and limb of persons.
Fig. 6 - 3 Recoil force when switching on the trigger gun
WARNING
Danger of burns and scalds by hot surfaces or water.
The device is designed for a water inlet temperature of up to
● 45 °C for KD623, KD823 and KD940
● 80 °C for KD940-F
During operation with hot water inlet, surfaces of device parts or
cleaning objects may get hot (parts of pump, metal parts of spray
lance etc.).
Touching hot surfaces or hot water can cause burns or scalding of the
skin surface. Avoid contact with hot water.
Make sure surfaces of device parts or water have cooled before
touching.
To Next Page
Loading...
