Eighteeth HyperLight-G - Troubleshooting

9 Troubleshooting
Page 30 / 42
9 Troubleshooting
When trouble is found, check the following points before contacting your
distributor. If none of these are applicable or the trouble is not remedied even
after action has been taken, the product may have failed. Contact your
distributor.
Malfunction
Causes
Methods
The battery is low
Use the charger to charge the
machine.
The machine
temperature is too
high.
Let stand for more than half an
hour.
Abnormal exposure
time
During the exposure process,
the finger released the
exposure button, causing the
exposure to be forcibly
terminated.
Drop detected
A fall of the machine is
detected, which may cause
damage to the machine.