8 Maintenance
Page 29 / 42
8 Maintenance
Incorrect operation or failure to maintain the device in accordance with
the maintenance schedule relieves the manufacturer or his agent from all the
responsibilities for subsequent non-compliance, damage, injury, defect
and/or other malfunction. It is strongly recommended that only authorized
Service Representatives, trained specifically on the HyperLight-G device,
maintain and service the device.
Annual Maintenance: Observe the following steps for annual
maintenance of the HyperLight-G.
1. Verify that the Power button is working properly. When the device is
powered on, the display should illuminate and an indicator alarm
should sound.
2. Verify that the Panel key is working properly.
3. Check whether all interfaces on the screen are normal.
4. Checks whether the receiver can be switched.
5. Use the exposure function to test whether the machine can be
exposed properly.
6. Check whether the protective panel is damaged.
7. Check whether the battery is abnormal. If you do not use the
machine for a long time, you need to charge the machine every 6
months.
To Next Page
Loading...
