EINHELL GC-DP 3730 User Manual

GB
- 11 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Impeller
Consumables*
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_GC_DP_3730_SPK7.indb 11Anl_GC_DP_3730_SPK7.indb 11 12.02.2019 09:58:4112.02.2019 09:58:41

EINHELL GC-DP 3730 Specifications

General

Type	Velocity pump
Proper use	Drainage, Water purification
Product color	Black, Red
Assembly required	No
Suitable for indoor use	-
Suitable for outdoor use	Yes
Flow rate	9000 l/h
Grain size	30 mm
Maximum suction height	5 m
Maximum operating pressure	- bar
Maximum input water temperature	35 °C
AC input voltage	230 V
Power cable type	H05RN-F
Power source type	AC
AC input frequency	50 Hz
Package weight	5150 g
Quantity per pack	1 pc(s)
Cable length	10 m

Weight and Dimensions

Depth	220 mm
Width	180 mm
Height	400 mm
Weight	4300 g